• OEM Factory for Polarization Maintaining 24Fibers MTP Patch cord - 100G QSFP28 SR4 100M – INTCERA

OEM Factory for Polarization Maintaining 24Fibers MTP Patch cord - 100G QSFP28 SR4 100M – INTCERA

Product description

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for MPO Cable Patch cord , Fiber Optic MPO SM MM OM4 Patchcords , MPO 12fibers Cassette , We warmly welcome your participation based on mutual benefits in the near future.
OEM Factory for Polarization Maintaining 24Fibers MTP Patch cord - 100G QSFP28 SR4 100M – INTCERA Detail:

Features: 

This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100Gbps bandwidth. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses an 12-fiber MTP/MPO connector. This module incorporates INTCERA proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. 

● 4 channels full-duplex transceiver modules
● Transmission data rate up to 25.78Gbps per channel
● Support 40GE and 56G FDR data rates
● 4 channels 850nm VCSEL array
● 4 channels PIN photo detector array
● Internal CDR circuits on both receiver and transmitter channels
● Support CDR bypass
● Low power consumption < 2.5W (low power version)
● Hot-pluggable QSFP28 form-factor
● Maximum link length of 70m on OM3 Multimode Fiber (MMF) and 100m on OM4 MMF
● Single MPO12 connector receptacle
● Operating case temperature range: 0°C to +70°C
● 3.3V power supply voltage
● RoHS-6 compliant (lead free)

Application:

● IEEE 802.3bm 100GBASE-SR4
● IEEE 802.3ba 40GBASE-SR4
● InfiniBand FDR/EDR


Product detail pictures:

OEM Factory for Polarization Maintaining 24Fibers MTP Patch cord - 100G QSFP28 SR4 100M – INTCERA detail pictures


Related Product Guide:

Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for OEM Factory for Polarization Maintaining 24Fibers MTP Patch cord - 100G QSFP28 SR4 100M – INTCERA , The product will supply to all over the world, such as: United Arab Emirates, Argentina, Austria, We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need to have!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
Write your message here and send it to us

Related Products

More +
  • QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

    QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

  • QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached Cable

    QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached ...

  • MPO MTP Optical Fiber Patchcord

    MPO MTP Optical Fiber Patchcord

  • Fiber Array

    Fiber Array