• OEM Supply 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA

OEM Supply 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA

Product description

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for MPO Trunk Cables , Fiber Optical Terminal Box , MTP Attenuators , We are now on the lookout ahead to even larger cooperation with abroad consumers dependant on mutual added benefits. When you are interested in almost any of our products, be sure to experience cost-free to make contact with us for more facts.
OEM Supply 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA Detail:

Features:

The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data. 
The central wavelengths of the 4 CWDM channels are 1271nm, 1291nm, 1311nm and 1331nm as members of the CWDM wavelength grid defined in CLR4 MSA. The high-performance uncooled CWDM DFB transmitters and high-sensitivity PIN receivers provide superior performance for High-Performance Computing (HPC) 100-Gigabit Ethernet applications up to 10km links. 

● 4 channels full-duplex transceiver modules
● Based on 100G CLR4 MSA baseline requirement
● Transmission data rate up to 25.78Gbps per channel
● 4 channels DFB-based CWDM uncooled transmitter
● 4 channels PIN ROSA
● Internal CDR circuits on both receiver and transmitter channels
● Non airtight optical engine design
● Qualified under temperature 85°C and humidity 85% @500 hours (the variation of TX ≤ 2.5dBm, RX ≤ 1.5dBm)
● Low power consumption < 3.5W
● Hot-pluggable QSFP28 form-factor
● Up to reach 10km for G.652 SMF
● Duplex LC receptacles
● Operating case temperature range 0°C to +70°C
● 3.3V power supply voltage
● RoHS-6 compliant (lead free)

Application:

● Data Center Interconnect (DCI)
● 100G CLR4 applications
● InfiniBand EDR interconnects
● High-Performance Computing (HPC)
● Enterprise networking


Product detail pictures:

OEM Supply 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA detail pictures


Related Product Guide:

Our enterprise insists all along the standard policy of "product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as consistent purpose of "reputation first, client first" for OEM Supply 1km Wireless Transceiver - 100G QSFP28 CLR4 10KM – INTCERA , The product will supply to all over the world, such as: Georgia, Qatar, Zurich, Our aim is to help customers to make more profits and realize their goals. Through a lot of hard work, we establish a long-term business relationship with so many customers all around the world, and achieve win-win success. We will continue to do our best effort to service and satisfy you! Sincerely welcome you to join us!
Write your message here and send it to us

Related Products

More +
  • QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

    QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

  • QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached Cable

    QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached ...

  • MPO MTP Optical Fiber Patchcord

    MPO MTP Optical Fiber Patchcord

  • Fiber Array

    Fiber Array