• Short Lead Time for Fiber Patch Cord Mtp Harnesses Cables - 100G QSFP28 CLR4 2KM – INTCERA

Short Lead Time for Fiber Patch Cord Mtp Harnesses Cables - 100G QSFP28 CLR4 2KM – INTCERA

Product description

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for Fiber Optic Uniboot LC Connectors , MTP Female to Male Attenuators , MTP Cable Assemblies , All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Short Lead Time for Fiber Patch Cord Mtp Harnesses Cables - 100G QSFP28 CLR4 2KM – INTCERA Detail:

Features:

The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data. 
The central wavelengths of the 4 CWDM channels are 1271nm, 1291nm, 1311nm and 1331nm as members of the CWDM wavelength grid defined in CLR4 MSA. The high-performance uncooled CWDM DFB transmitters and high-sensitivity PIN receivers provide superior performance for 100-Gigabit Ethernet applications up to 2km links. 

● 4 channels full-duplex transceiver modules
● Based on 100G CLR4 MSA baseline requirement
● Transmission data rate up to 25.78Gbps per channel
● 4 channels DFB-based CWDM uncooled transmitter
● 4 channels PIN ROSA
● Internal CDR circuits on both receiver and transmitter channels
● Non airtight optical engine design
● Qualified under temperature 85°C and humidity 85% @500 hours (the variation of TX ≤ 2.5dBm, RX ≤ 1.5dBm)
● Low power consumption < 3.5W
● Hot-pluggable QSFP28 form-factor
● Up to reach 2km for G.652 SMF
● Duplex LC receptacles
● Operating case temperature range 0°C to +70°C
● 3.3V power supply voltage
● RoHS-6 compliant (lead free)

Application:

● Data Center Interconnect (DCI)
● 100G CLR4 applications
● InfiniBand EDR interconnects
● Enterprise networking


Product detail pictures:

Short Lead Time for Fiber Patch Cord Mtp Harnesses Cables - 100G QSFP28 CLR4 2KM – INTCERA detail pictures


Related Product Guide:

Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Short Lead Time for Fiber Patch Cord Mtp Harnesses Cables - 100G QSFP28 CLR4 2KM – INTCERA , The product will supply to all over the world, such as: Sao Paulo, Libya, Czech Republic, We are proud to supply our products and solutions to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
Write your message here and send it to us

Related Products

More +
  • QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

    QSFP+ 40Gb/s to 4SFP+ Direct Attached Cable

  • QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached Cable

    QSFP28 100Gb/s to 2 QSFP28 50G Direct Attached ...

  • MPO MTP Optical Fiber Patchcord

    MPO MTP Optical Fiber Patchcord

  • Fiber Array

    Fiber Array